June 2013

You are currently browsing the monthly archive for June 2013.

Special Content: Repraps for Education

This is part of a series of posts about starting and facilitating a project-based 3D printer club at a local elementary school, with the ultimate goal of replicating the program at schools everywhere. We'll be posting as many details as possible, including lesson plans and supporting materials. For more information about the entire project, including a listing of posts related to it, please visit the 3D Printer Club for Schools project page. 

Here’s a certificate of achievement that you can use for the kids who complete the project at your school. We had two titles: The kids who were in the club were awarded “3D Printer Maker” certificates, and those that helped out a lot (usually younger siblings) were awarded “”3D Printer Apprentice” certificates. The text of the certificate is shown below the image.

Download the SVG file here: 3D Printer Club: Lesson Plans and Other Documents

3D Printer Club Certificate of Achievement

3D Printer Club Certificate of Achievement

The border features the typical honeycomb-style infill pattern that 3D prints often use.

Here’s the text of the certificate:

Let it be known that on this twenty-fourth day of May, two thousand and thirteen,

Student Name

is hereby honored and recognized for outstanding achievement as part of an awesome team of awesome kids who built a fully functional 3D printer—from scratch, having learned tons and tons of cool stuff along the way, including blogging, accounting, sourcing, assembly, robotics, electronics, management, teamwork, and a bunch of other awesome things too numerous to list. This exceedingly rare and highly coveted document therefore confers upon the aforementioned Maker, the esteemed, hard-earned, and frankly just awesome title of

3D Printer Maker

with all the rights, privileges, and honors appertaining thereunto.

In this video, Jacob shows an easy way to set up a PCB heatbed for your 3D printer — a method that allows the entire surface of the heatbed to be used for printing. He also shows how to cut inexpensive certificate frame glass to size with some simple tools. We’ve had printers with a heatbed setup just like this running without incident for over a year.

Supplies used: PCB Heatbed (with high-temperature wire attached), glass (same size as heatbed), scissors, kapton tape, four M3 nuts and screws (12-16mm), screwdriver & pliers, thermistor, thermistor lead insulation (kapton tape works, too), and pipe insulation tape. See below for glass cutting tools.

Glass Cutting Tools & Materials: Safety glasses, sheet glass (certificate frame glass works well), glass cleaner, paper towels, permanent marker, ruler, cutting oil, straight edge, glass cutting tool, breaking edge, leather gloves, and sandpaper.

A project-based RepRap build is the perfect way to bring STEM and many other disciplines to your school. To learn more about starting a 3D printer build at your school, visit http://www.thefrankes.com/wp/?page_id=2766.

Music

Special Content: Repraps for Education

This is part of a series of posts about starting and facilitating a project-based 3D printer club at a local elementary school, with the ultimate goal of replicating the program at schools everywhere. We'll be posting as many details as possible, including lesson plans and supporting materials. For more information about the entire project, including a listing of posts related to it, please visit the 3D Printer Club for Schools project page. 

Here’s a video to the team from software developer and RepRap expert Alessandro Ranellucci, the creator of the extremely popular Slic3r software.